Full Braided Brake Line Kit with Bias to Rear | Legend Car

GO Motorsports' full custom brake line kit with Bias to Rear (Proportioning Valve Sold Seperately)

Please select: 

1. Drum Brakes

2. Disc Brakes w/ AN3 From Master to Rear Tee**

3. Disc Brakes w/ AN4 From Master to Rear Tee**

** Both Disc Brake options will be AN4 from Rear Tee to rear calipers

Kit Includes (Fragola):

• Seven (7) Customer Brake Hose Assemblies:
  • One (1) Left Front From Master - Brake Line
  • One (1) Right Front From Master or Left Front From Bulkhead - Brake Line
  • One (1) Brake Bias to Rear End (AN3 or AN4 depending on selection) - Brake Line
  • One (1) Master Cylinder to Bulkhead (AN3 or AN4 depending on selection) - Brake Line
  • One (1) Bulkhead to Brake Bias (AN3 or AN4 depending on selection) - Brake Line
  • One (1) Left Rear (AN3 or AN4 depending on selection) - Brake Line
  • One (1) Right Rear (AN3 or AN4 depending on selection) - Brake Line
• One (1) (AN3 or AN4 depending on selection) Flare Tee Fitting (Male-Male-Male)
• One (1) AN3 Flare Tee Fitting (Male-Female-Male)
• One (1) (AN3 or AN4 depending on selection) Straight Flare Bulkhead Fitting
• One (1) (AN3 or AN4 depending on selection) Bulkhead Nut
• (Four (4) if Drum, Two (2) if Disc with AN3 to Rear Tee, One (1) if Disc with AN4 to Rear Tee) AN3 Straight Brake and Clutch Master Adaptor
• Two (2) AN3 Male to 1/8 NPT Straight Adapter (If Drum or Disc with AN3 to Rear Tee)
• Two (2) AN4 Male to 1/8 NPT Straight Adapter (If Disc with AN4 to Rear Tee)
• One (1) AN4 Female Swivel Reducer to AN3 Male (If Disc with AN3 to Rear Tee)
• One (1) AN4 Straight Brake Master Adapter (If Disc with AN4 to Rear Tee)
• One (1) Plug (In Case you have a Steel Master Cylinder)

Brake line Details:

• Fragola Performance Systems PTFE brake hose assemblies with black coverings. These strong, flexible units are constructed with PTFE tubing, reinforced with an outer braid of stainless steel. A black plastic covering adds another layer of protection. They are resistant to heat and most chemicals, and are compatible with all brake fluids. All hoses are pre-assembled and each hose is pressure tested to its rated working pressure.