Full Braided Brake Line Kit with Left Front Bias (Bias Mounted in Car) | Legend Car

GO Motorsports' full custom brake line kit with Left Front Bias (Bias Mounted in Car) (Proportioning Valve Sold Seperately)

Please select: 

1. Drum Brakes

2. Disc Brakes w/ AN3 From Master to Rear Tee**

3. Disc Brakes with Lines to Also Have Rear Bias (AN3 to Rear Tee)**

4. Disc Brakes with Lines to Also Have Rear Bias (AN4 to Rear Tee)**

** All Disc Brake options will be AN4 from Rear Tee to rear calipers

Kit Includes (Fragola):

• Nine (9) Custom Brake Hose Assemblies:
  • One (1) Right Front From Master or Left Front From Bulkhead - Brake Line
  • One (1) Right Front From Master or Left Front From Bulkhead - Brake Line
  • Two (2) Master Cylinder to Bulkhead (One may be AN4 depending on Selection) - Brake Line
  • One (1) Left Rear (AN3 or AN4 depending on selection) - Brake Line
  • One (1) Right Rear (AN3 or AN4 depending on selection) - Brake Line
  • One (1) Bulkhead to Rear (AN3 if No Rear Bias is selected) - Brake Line
  • One (1) Bulkhead to Brake Bias (Additional AN3 or AN4 Line depending on selection and if rear bias is added) - Brake Line
  • One (1) Brake Bias to Rear End (AN3 or AN4 depending on selection if rear bias lines are selected) - Brake Line
  • One (1) Brake Bias Back to Bulkhead - Brake Line
• (AN3 or AN4 depending on selection) AN3 Flare Tee Fitting (Male-Male-Male)
• One (1) AN3 Flare Tee Fitting (Male-Female-Male)
• (Three (3) if Drum or Disc with AN3 to Rear Tee, Two (2) if Disc with AN4 to Rear Tee) AN3 Straight Flare Bulkhead Fitting
• (Three (3) if Drum or Disc with AN3 to Rear Tee, Two (2) if Disc with AN4 to Rear Tee) AN3 Bulkhead Nut
• (Four (4) if Drum, Two (2) if Disc with AN3 to Rear Tee, One (1) if Disc with AN4 to Rear Tee) AN3 Straight Brake and Clutch Master Adaptor
• One (1) AN4 Female Swivel Reducer to AN3 Male (If Disc with AN3 to Rear Tee)
• One (1) AN4 Straight Brake Master Adapter (If Disc with AN4 to Rear Tee)
• (One (1) if Drum or Disc with No Rear Bias, Three (3) If Disc with AN3 to Rear Tee with Rear Bias Lines added) AN3 Male to 1/8 NPT Straight Adapter
• Two (2) AN4 Male to 1/8 NPT Straight Adapter (If Disc with AN4 to Rear Tee with Rear Bias Lines Added)
• One (1) Brake Line 90 Degree Adapter
• One (1) Plug (In case you have a Steel Master Cylinder)

Brake line Details:

• Fragola Performance Systems PTFE brake hose assemblies with black coverings. These strong, flexible units are constructed with PTFE tubing, reinforced with an outer braid of stainless steel. A black plastic covering adds another layer of protection. They are resistant to heat and most chemicals, and are compatible with all brake fluids. All hoses are pre-assembled and each hose is pressure tested to its rated working pressure.